54-Slot PETG Paint Rack — 25mm Bottle Diameter
Organize your paints with a durable, free-standing rack that holds 54 bottles. Each slot is sized for 25mm-diameter bottles and accommodates all major hobby paint brands, including Atom/Ammo, AK, Vallejo, and Army Painter. Bottles sit angled for compact storage, improved visibility, and easy access while you work.
Key features
Capacity: 54 slots
Material: PETG — sturdy, slightly flexible, chemical-resistant
Slot diameter: 25 mm — compatible with Atom/Ammo, AK, Vallejo, Army Painter, and similar bottles
Free-standing design — place on any workbench or shelf
Angled bottles — saves space and makes labels easier to read and reach
Non-modular — single-piece rack for stable, uniform storage
Customization Need a different slot size or layout? Contact us with your bottle dimensions and preferred configuration, and we’ll create a custom rack to fit your needs.
Care and use
Wipe clean with a damp cloth; avoid prolonged exposure to solvent splashes.
PETG tolerates normal hobby solvents but avoid soaking.
Place on a flat surface to ensure stability.
Includes
One 54-slot PETG paint rack (assembled, ready to use)
If you need a different slot diameter or a modular option, fill out the contact form to request a custom design.
3-tier PETG Paint Rack — 7×40mm, 8×35mm, 11×25mm
This precision 3D-printed PETG combo rack keeps your daily-use paints organized and within easy reach. The tiered design holds:
7 bottles (40 mm) : Large Tamiya
8 bottles (35 mm) : Small Tamiya
11 bottles (25 mm) : Ammo, AK, Vejallo
Features
Open-face slots for quick label reading and easy bottle removal.
Sturdy PETG construction for durability and chemical resistance.
Compact footprint to save bench space while keeping frequently used paints visible and accessible.
Clean, neutral lines that fit any workbench setup.
Finish and color
Standard colors: grey or black PETG.
Custom colors available on request through Bambu.
The 25mm slot can also be swapped for 27mm for MRP paints.
Use it to streamline your workflow, reduce clutter, and have the paints you need at hand for every build.
3D printed in PETG. Three-tier paint rack that holds 30 bottles with a maximum diameter of 28 mm per slot. Designed to fit MRP paints; also compatible with any bottle of similar or smaller diameter. Features - Material: PETG for durability, chemical resistance, and low flex - Capacity: 30 bottles across three tiers (10 per tier) - Slot diameter: 28 mm maximum — fits MRP bottles and most comparable brands - Tier spacing: staggered tiers for clear label visibility and easy access - Footprint: compact bench-friendly design to reduce clutter - Finish: smooth, consistent PETG surface suitable for workshop use - Mounting: free-standing; optional holes for magnets to link multiple together.
Specifications - Total tiers: 3 - Bottles per tier: 10 - Max bottle diameter per slot: 28 mm - Material: PETG
- Measure your paint bottles before printing if using a brand different from MRP. For bottles close to 28 mm, allow small clearance for ease of insertion/removal. - PETG is more flexible than PLA; if you need a stiffer.
- If you want a version scaled for different bottle diameters or with a different number of slots, provide target dimensions and capacity.
3D printed in PETG — 14-slot holder in 2 rows
Primarily designed for Ammo’s small shader bottles, this 14-slot organizer holds two staggered rows of 7 bottles each. It fits any bottle of the same dimensions and keeps your shaders secure and portable.
Features
Material: Durable PETG for strength and slight flexibility
Capacity: 14 slots (2 rows of 7)
Secure fit: Snug pocket design prevents bottles from falling out
Stability: Base geometry and staggered rows minimize tipping
Compact profile: Slim footprint for efficient bench or transport storage
Portable: Light enough to move with the rest of your kit
Dimensions and fit
Designed around Ammo small shader bottle dimensions; will accept other bottles of equivalent size. Measure your bottles if unsure.
Slightly flexible PETG allows for tight, reliable retention without stressing the bottles.
Care and use
Clean with mild soap and water; avoid prolonged exposure to strong solvents
Store away from high heat to maintain shape
If bottles are painted or sticky, wipe necks before inserting to keep slots clean
Ideal for modelers who want organized, tip-resistant storage for small shader bottles in a compact, transportable package.
3D-printed in PETG — 15-Slot Wall Hanger for Acrylic Washes, Oil Tubes, Markers, and More
Keep your workbench tidy and items within easy reach. This durable PETG wall hanger holds up to 15 tubes, bottles, or markers with necks up to 12 mm wide and 4 mm tall. Each slot accepts one item.
Key features
Material: PETG for strength, slight flexibility, and chemical resistance
Capacity: 15 single-item slots
Compatible: AK Real Color, GAAHLERI markers, acrylic washes, oil tubes, and other items with a neck no larger than 12 mm wide × 4 mm tall. It will not fit Tamiya putty due to the design of the neck of the putty container.
Mounting: Pre-drilled holes for quick installation; can be mounted up or down orientation to suit your storage preference
Fit: One item per slot to prevent crowding and ensure secure holding
Dimensions: Designed to accommodate a broad range of product shapes within the stated neck size limits
Use cases
Organize acrylic washes and oil paints for faster workflow
Store commonly used markers and pens at arm’s reach
Keep dedicated colors or mediums grouped by slot for quicker selection during builds
Installation notes
Use appropriate screws and anchors for your wall material (drywall, wood, concrete)
For secure holding of heavier tubes, use wall anchors rated for the load
Mounting in the “up” orientation holds items by their neck; mounting “down” can better secure taller items — choose based on your stored items’ shapes
Care
PETG is easy to clean with mild soap and water
Avoid prolonged contact with strong solvents that can affect some plastics
If you need a different slot count, spacing, or custom mounting hole placement, we can create a custom version to fit your exact needs.
Printed in durable PETG. Holds 21 large Tamiya bottles or any bottle up to 40 mm diameter. The front of each slot is open so labels remain visible for quick identification. Fits are snug for secure storage yet allow easy, hassle-free removal when you need a bottle. Standard colors are black and gray PETG; other Bambu colors are available on request. A compact, durable organizer designed to keep modelers’ paint collections tidy and to improve workbench efficiency.
3D-printed 3-tier paint bottle holder — 24 slots (non-modular)
Capacity: 24 bottles (3 tiers, 8 slots per tier)
Fits bottles up to 35 mm diameter (compatible with Tamiya 10 ml, Mr. Color, Ammo Effects, AK pigments/washes/effects, panel washes, pigment jars, and other bottles of similar size)
Material: PETG for durable, slightly flexible, solvent-resistant performance
Design: Fixed 3-tier layout with consistent spacing to allow easy access, clear visibility, and quick identification of labels and caps
Footprint: Compact vertical profile to maximize bench space while keeping frequently used paints within reach
Stability: Low center of gravity and reinforced base to reduce tipping when loaded
Finish: Clean 3D-printed surfaces with small fillet radii around openings to protect bottle labels and prevent snagging
Use: Ideal for workbench organization, paint sorting by color/type, and reducing clutter during painting sessions
Notes: Non-modular — tiers are integral to the print and cannot be reconfigured. Printed in PETG; solvent exposure from strong thinners over time may affect surface finish. Verify bottle diameter before purchase if you use nonstandard containers.
T
Product: 30-Slot Paint Caddie — PETG
Description
3D-printed paint caddie designed for 25 mm diameter bottles (fits major brands: AMMO by Mig, ATOM, AK-Interactive, Vallejo, Army Painter, and similar).
Holds 30 bottles arranged in 3 rows with exposed fronts for easy identification (useful when paint IDs are on the bottom of labels).
Holes are slightly oversized for smooth insertion and removal of bottles without scraping labels.
Printed in durable PETG for everyday workbench use.
Features
Capacity: 30 bottles (3 rows).
Hole diameter: sized for 25 mm bottle bodies with a small clearance for easy access.
Material: PETG — good balance of strength, chemical resistance, and dimensional stability.
Magnet option: Each end can accept a 20 mm magnet (one per end). Magnets allow:
Joining multiple caddies together securely
Storing small metal tools (nippers, hobby knives) on the ends for quick access.
Shipping option: choose with or without magnets.
Color: standard color available; additional colors on request.
Dimensions & Fit (typical)
Designed for bottle bodies 25 mm in diameter. If your bottle has an unusual base or extra lip, compare beforehand.
Overall footprint and height optimized for stable tabletop placement and easy bottle viewing — contact us if you need exact dimensions or a custom layout.
Total length is 300mm.
Ordering & Customization
Select magnet option: included (pre-installed) or excluded.
Request custom color during order if you prefer a non-standard finish.
For multi-unit setups, magnets can be used to link sections; order magnets installed or supply your own.
Care & Use
Clean with mild soap and water. Avoid strong solvents or prolonged exposure to concentrated thinning agents.
PETG is durable but avoid dropping from height or placing heavy objects on top.
Questions or custom requests? Provide bottle brand/model or a photo of the bottles if you need a fit check or custom hole sizing.
Non-modular paint rack — holds 15 bottles (25 mm, 32mm, 35mm)
Designed for paint and solution bottles from:
25mm- AMMO by MIG, AK Interactive, Vallejo, The Army Painter.
28mm MRP.
32mm AlCLAD II.
35mmTamiya (35mm/10ml), Createx Colors, Chroma AIr.
Evenly spaced holes provide easy access while holding bottles securely to prevent tipping.
Features a slot for a bar connector for linking additional sections when you need more capacity (1 included with each stand).
Ideal for hobbyists who want more bench space without sacrificing accessibility to frequently used paints.
3D printed in PETG for durable, chemical-resistant performance.
Available in any color offered by Bambu.
Dimensions and fit
Bottle hole diameter: 25 mm, 28 mm, 32 mm, 35mm
Holds: 15 bottles
Overall footprint: compact, optimized for standard hobby benches
Care and use
Clean with a mild detergent and water; PETG resists common hobby solvents but avoid prolonged exposure to strong chemicals.
If linking sections, ensure connectors are fully engaged for a stable assembly.
Made by B.M.W. Designs — precision 3D-printed organizing solutions for scale modelers.
A precision-designed 3D-printed holder that cradles 2 Tamiya glue and panel wash bottles at a stable angle or any thing else that fits. Keeps bottles securely in place so you can unscrew caps and dispense with one hand—no tipping, no spills, no mess. Ideal for scale modelers who want faster, cleaner workflow at the bench. This will hold 2 bottles side by side. Will also support the orange Tamiya glue bottles.
High-strength PETG (standard) — durable, chemical-resistant, slightly flexible for a snug fit.
Optional: PLA+ for crisp detail and low cost; ABS for increased heat and solvent resistance.
Quality checks: fit test with common Tamiya bottle sizes, stability test under one-handed cap torque, and drip-resistance validation.
One-handed operation: hold the bottle in the cradle and unscrew or brush with your free hand—ideal for multitasking during painting sessions.
Clean bench workflow: eliminates spills and sticky caps, keeping your work area tidy and reducing sticky residue on tools.
Mobile rig: light and compact for taking to club nights or shows; fits neatly in a carry case to keep bottles secure in transit.
Display & storage: use it as a neat display for frequently used fluids so everything is easy to grab and put back.
Gift for modelers: practical, low-maintenance accessory that improves every step of the build process.
Prevents spills and waste
Enables single-handed use
Durable, solvent-aware materials
Easy to clean and maintain
Standard cradle fits all Tamiya glue (square and orange bottle) and panel wash bottles. Also will fit any bottle of similar size and dimension.
Wipe clean with isopropyl alcohol or mild soap and water.
3D Printed 10‑Slot Organizer — Fits 40 mm Bottles
Keep your workspace clean, accessible, and built for the long haul. This 10‑slot organizer is precision 3D printed to hold any 40 mm bottle — including larger Tamia bottles and Ammo by MIG DIO Drybrush paints — with a secure, wobble‑free fit.
Product highlights
Capacity: 10 slots sized for 40 mm diameter bottles
Compatibility: Designed for larger Tamia bottles, Ammo by MIG DIO Drybrush paint, and any other 40 mm container
Materials: Standard print in PETG for toughness and chemical resistance; ABS or ASA available on request for higher heat or UV durability
Finish: Clean, consistent layer lines for a professional look; custom color options available by order
Base: Stable footprint to prevent tipping; slots keep bottles upright and organized
Dimensions: Compact footprint optimized for hobby benches and hobby store displays (dimensions available on request)
Color & material options
Standard single color in PETG
Two-tone color options: Comes in two tone-inspired upon request
Additional colors: Wide range of colors and finishes available when ordered — specify preferred filament color
Material upgrades: ABS or ASA printed on demand for increased temperature or outdoor resistance. Or PLA
Why choose this organizer
Purpose‑built for modelers and painters who use larger 40 mm bottles
Durable construction resists solvents and accidental knocks
Customizable material and color choices let you tailor durability and style to your workflow
Holds bottles securely to prevent spills and speed up your painting process
Ordering & lead time
Standard prints ship in PETG in selected colors
Custom materials or colors available — please specify at checkout; lead times may vary depending on material and color availability
Need measurements, mounting options, or a custom slot layout? Provide your bottle specs or desired configuration and we’ll quote a custom print.
3D Printed 10‑Slot Organizer — Fits 35 mm Bottles
Keep your workspace clean, accessible, and built for the long haul. This 10‑slot organizer is precision 3D printed to hold any 35 mm bottle —it secures Ammo by MIG primers, pigments and large filter solutions bottles, Tamiya paints (10ml), AK effects, Cobra Motor Paints and Creartex Wicked Colors or any bottle with similar diameter. a A secure wobble‑free fit.
Product highlights
Capacity: 10 slots sized for 35 mm diameter bottles
Compatibility: 35mm or less.
Materials: Standard print in PETG for toughness and chemical resistance; ABS or ASA available on request for higher heat or UV durability
Finish: Clean, consistent layer lines for a professional look; custom color options available by order
Base: Stable footprint to prevent tipping; slots keep bottles upright and organized
Dimensions: Compact footprint optimized for hobby benches and hobby store displays
Color & material options
Two-tone color options: Comes standard in single color but select two tone in the drop down if wanted at no additional cost.
Additional colors: Wide range of colors and finishes available ( any color or currently available form Bambu Labs
Material upgrades: ABS or ASA printed on demand for increased temperature or outdoor resistance
Why choose this organizer
Purpose‑built for modelers and painters who use larger 35mm bottles
Durable PETG construction resists solvents and accidental knocks
Customizable material and color choices let you tailor durability and style to your workflow
Holds bottles securely to prevent spills and speed up your painting process
Ordering & lead time
Standard prints ship in PETG.
Custom materials or colors available — please specify in the drop down; lead times may vary depending on material and color availability
Need measurements, mounting options, or a custom slot layout? Provide your bottle specs or desired configuration and we’ll quote a custom print.
No results match your search. Try removing a few filters.
